• Noorani, S. and Shamim, T., 2009, "Transient Response of a Polymer Electrolyte Membrane Fuel Cell Subjected to Time-Varying Modulating Conditions," (under review) Journal of Fluid Dynamics and Material Processing.
• Shamim, T., 2009, "Effect of Engine Exhaust Gas Modulations on the Cold Start Emissions," (under review) Proc. Inst. Mech. Eng. - Part D: Journal of Automobile Engineering.
• Shamim, T., 2008, "Effect of Oxygen Storage Capacity on the Dynamic Characteristics of an Automotive Catalytic Converter", Energy Conversion & Management,49(11):3292-3300.
• Shamim, T., 2008, "Effect of Engine Exhaust Temperature Modulations on the Performance of Automotive Catalytic Converters," ASME Journal of Engineering for Gas Turbines and Power,130(1):012801.
• Khan, M. R. S., and Shamim, T., 2008, " Regeneration Characteristics of Diesel Particulate Filters under Transient Exhaust Conditions," Proc. Inst. Mech. Eng. - Part D: Journal of Automobile Engineering,222(12):2469-2485.
• Vorobev, A., Zikanov, O., and Shamim, T., 2007, "A Computational Model of a PEM Fuel Cell with Finite Vapor Absorption Rate," Journal of Power Sources, 166:92-103.
• Shamim, T., Xia, C., and Mohanty, P., 2007, "Modeling and Analysis of Combustion Assisted Thermal Spray Processes," International Journal of Thermal Sciences, 46(8):755-767.
• Shamim, T., 2006, "Effect of Unequal Fuel and Oxidizer Lewis Numbers on Flame Dynamics," International Journal of Thermal Sciences, 45(12):1213-1223.
• Gaustad, M. D., and Shamim, T., 2006, "A Numerical Study of the Effects of Radiative Heat Losses on Diffusion Flames," Journal of Mechanical Engineering Science - Part C. 220(8):1189-1199
• Shamim, T., 2005, "The Effect of Space Velocity on the Dynamic Characteristics of an Automotive Catalytic Converter," SAE Transactions - Journal of Fuels and Lubricants, Vol. 114-4:974-982, (also published as SAE 2005-01-2160).
• Shamim, T., 2005, "Dynamic Response of Automotive Catalytic Converters to Modulations in Engine Exhaust Compositions,"International Journal of Engine Research, 6(6):557-567.
• Shamim, T., 2003, "Effect of Heat and Mass Transfer Coefficients on the Performance of Automotive Catalytic Converters," International Journal of Engine Research, 4(2):129-141.
• Shamim, T., and Medisetty, V. C., 2003, "Dynamic Response of Automotive Catalytic Converters to Variations in Air-Fuel Ratio," ASME Journal of Engineering for Gas Turbines and Power, 125(2):547-554.
• Shamim, T., and Shen, H., 2003,"Effect of Geometric Parameters on the Performance of Automotive Catalytic Converters," International Journal of Science and Technology. 14:15-22.
• Shamim, T., 2002, "Effect of Lewis Number on Radiative Extinction and Flamelet Modeling," International Journal of Heat and Mass Transfer, 45(6):1249-1259.
• Shamim, T., Shen, H, Sengupta, S., Son, S., and Adamczyk, A. A., 2002, "Development of a Mathematical and Numerical Model for Three-Way Catalytic Converters," ASME Journal of Engineering for Gas Turbines and Power, 124(2):421-428.
• Shamim, T., Shen, H, and Sengupta, S., 2000, "Comparison of Chemical Kinetic Mechanisms in Simulating the Emission Characteristics of Catalytic Converter," SAE Transactions - Journal of Fuels and Lubricants, Vol. 109 (also presented at 2000 International Fall Fuels and Lubricants Meeting & Exposition, Paris, France, SAE Paper 2000-01-1953).
• Shamim, T., and Atreya, A., 2000, "The Effect of Time Dependent Partial Premixing in Radiating Flamelets," Combustion & Flame, 123:241-251.
• Shamim, T., and Atreya, A., 2000, "Transient Response of a Radiating Flamelet to Changes in Global Stoichiometric Conditions," Combustion & Flame 121:59-74.
• Atreya, A., Zhang, C., Kim, H.K., Shamim, T., and Suh, J., 1996, "The Effect of Changes in the Flame Structure on the Formation and Destruction of Soot and NOx in Radiating Diffusion Flames," Proceedings of Combustion Institute, 26:2181-2189.
• Shamim, T., and McDonald, T.W., 1995, "An Experimental Study of Heat Transfer Through Liquid Foam," ASHRAE Transactions, Vol. 101, Part I, pp. 150-157.

Book Chapters  

• Shamim, T., 2006, "Modeling of Three-Way Catalytic Converter System," in: Technologies for Near-Zero-Emission Gasoline-Powered Vehicle, Zhao, F. (editor), SAE, Warrendale, PA.
• Shamim, T., 2004, "Catalytic Converter System Modeling," in: Advanced Developments in Ultra-Clean Gasoline-Powered Vehicles, Zhao, F. (editor), SAE, Warrendale, PA.

Conference Proceedings

• Noorani, S. and Shamim, T., 2009, "Transient Response of a Polymer Electrolyte Membrane Fuel Cell Subjected to Time-Varying Modulating Conditions," Fourth International Conference on Thermal Engineering: Theory and Applications ICTEA 2009, Abu Dhabi, UAE, Jan 12 - 14.
• Shamim, T., 2007, "Effect of Oxygen Storage Capacity on the Dynamic Characteristics of an Automotive Catalytic Converter," Third International Conference on Thermal Engineering: Theory and Applications ICTEA 2007, Amman, Jordan, May 20-23.
• Shamim, T., 2006, "Control of Cold Start Emissions through Modulation of Engine Exhaust Gases," SAE 2006 World Congress, Detroit, MI, Paper SAE 2006-01-0627.
• Shamim, T., 2006, "Effect of Engine Exhaust Temperature Modulations on the Performance of Automotive Catalytic Converters,"Proceedings of the 2006 ASME Internal Combustion Engine Division Conference, Aachen, Germany, Paper ICES2006-1413.
• Khan, M. R. S., and Shamim, T., 2005, " Regeneration Characteristics of Diesel Particulate Filters under Transient Exhaust Conditions," Proceedings of the 2005 ASME Internal Combustion Engine Division Conference, Chicago, IL, Paper ICES2005-1069.
• Shamim, T., 2004, "Modeling and Simulations of Automotive Catalytic Converters," Proceedings of the IEEE-INMIC 2004 Eighth International Multitopic Conference, Lahore, Pakistan, Paper # 1114.
• Shamim, T., 2003, "Dynamic Response of Automotive Catalytic Converters to Modulations in Engine Exhaust Compositions," Proceedings of the 2003 ASME Internal Combustion Engine Division Conference, Salzburg, Austria, Paper ICES2003-669.
• Shamim, T., and Medisetty, V. C., 2001, "Prediction of the Dynamic Response of Automotive Catalytic Converters with the Simplified Chemical Kinetics," Proceedings of the Thirty-Seventh Heat Transfer and Fluid Mechanics Institute, Sacramento, 37:21-33.
• Shamim, T., Shen, H, and Sengupta, S., 2000, "Comparison of Chemical Kinetic Mechanisms in Simulating the Emission Characteristics of Catalytic Converter," 2000 International Fall Fuels and Lubricants Meeting & Exposition, Paris, France, SAE Paper 2000-01-1953.
• Sengupta, S., Shen, H, and Shamim, T., 2000, "Emission Characteristics of Catalytic Converters During Various Test Cycles," Fourth ISHMT/ASME Heat and Mass Transfer Conference, Pune, India, Jan 12-14, 2000.
• Shen, H, Shamim, T., and Sengupta, S., 1999, "An Investigation of Catalytic Converter Performance during Cold Starts," 1999 International Fall Fuels and Lubricants Meeting & Exposition, Toronto, Canada, SAE Paper 1999-01-3473.
• Shen, H, Shamim, T., and Sengupta, S., Son, S., Adamczyk, A. A., 1999, "Performance Simulations of Catalytic Converters During the Federal Test Procedure," Proceedings of the ASME National Heat Transfer Conference, Albuquerque, NM, Aug 15-17, Paper NHTC99-230.
• Shen, H, Shamim, T., and Sengupta, S., 1999, "Performance Analysis and Design Optimization of Catalytic Converters," Proceedings of theThirty-Sixth Heat Transfer and Fluid Mechanics Institute, Sacramento, 36:133-142.
• Shamim, T., and Atreya, A., 1995, "Numerical Simulations of Radiative Extinction of Unsteady, Strained Diffusion Flames," Proceedings of the ASME Heat Transfer Division, 1995 ASME International Mechanical Engineering Congress and Exposition, San Francisco, CA, HTD Vol.317-2, pp. 69-74.

• Xia, C., Shamim, T., and Mohanty, P., 2005, "Gas Phase Dynamics of Combustion Assisted Thermal Spray Processes," Proceedings of the Fourth Joint Technical Meeting of the United States Sections of the Combustion Institute, Philadelphia, PA, paper #1101.
• Khan, M. R. S., and Shamim, T., 2004, "Effect of Transient Exhaust Condition on Thermal Regeneration of Diesel Particulate Filters," Proceedings of the 2004 Technical Meeting of the Central States Section of the Combustion Institute, Austin, TX, paper # C1-7.
• Shamim, T., 2003, "Dynamic Response of Automotive Catalytic Converters to Modulations in Engine Exhaust Compositions," Proceedings of the Third Joint Technical Meeting of the United States Sections of the Combustion Institute, Chicago, IL, paper #PM08.
• Shamim, T., and Khan, M. R. S., 2003, "Computational Modeling of Diesel Particulate Filters," Proceedings of the Third Joint Technical Meeting of the United States Sections of the Combustion Institute, Chicago, IL, paper #PM07.
• Shamim, T., 2002, "Effect of Lewis Number on Radiative Extinction and Flamelet Modeling," Proceedings of the Meeting of the Central States Section of the Combustion Institute, Knoxville, TN, paper # B2.3.
• Shamim, T., and Medisetty, V. C., 2001, "Dynamic Response of Automotive Catalytic Converters: The Role of Chemical Kinetic Mechanisms," Proceeding of the Second Joint Technical Meeting of the United States Sections of the Combustion Institute, Oakland, CA, paper # 274.
• Shamim, T., Medisetty, V. C., and Shen, H., 2000, "Dynamic Response of Catalytic Converters Subjected to Changes in Air-Fuel Ratio," Proceedings of the Meeting of the Central States Section of the Combustion Institute, Indianapolis, IN, pp. 389-394.
• Shamim, T., 1999, "Effect of Lewis Number on Radiative Extinction and Flamelet Modeling," Fifth International Micro-Gravity Workshop, Cleveland, OH, NASA Conference Publication 1999-208917, pp. 365-368.
• Shen, H, Shamim, T., and Sengupta, S., 1999, "A Numerical Study of Catalytic Converter Performance During the Federal Test Procedure," Proceedings of the First Joint Technical Meeting of the United States Sections of the Combustion Institute, Washington, DC, pp. 777-780.
• Shamim, T., 1998, "The Effect of Lewis Number on Radiative Extinction and Flamelet Modeling," Spring Technical Meeting of the Central States Section of the Combustion Institute, Lexington, KY, pp. 333-338.
• Shamim, T., and Atreya, A., 1997, "The Effect of Time Dependent Partial Premixing in Radiating Flamelets," Proceedings of the Spring Technical Meeting of the Central States Section of the Combustion Institute, Point Clear, AL, pp. 279-284.
• Zhang, C., Atreya, A., Kim, H.K., Suh, J., and Shamim, T., 1996, "The Effect of Flame Structure on Soot Inception, Growth and Oxidation in Counterflow Diffusion Flames," Proceedings of the 1996 Technical Meeting of the Central States Section of the Combustion Institute, Thirtieth Section Anniversary Technical Meeting, St. Louis, MO, pp. 151-156.
• Zhang, C., Atreya, A., Shamim, T., Kim, H.K., and Suh, J., 1996, "Measurements of OH, CH, C₂ and PAH in Laminar Counterflow Diffusion Flames," Proceedings of the 1996 Technical Meeting of the Central States Section of the Combustion Institute, Thirtieth Section Anniversary Technical Meeting, St. Louis, MO, pp. 157-162.
• Shamim, T., and Atreya, A., 1996, "Dynamic Response of Radiating Flamelets Subject to Variable Reactant Concentrations," Proceedings of the 1996 Technical Meeting of the Central States Section of the Combustion Institute, Thirtieth Section Anniversary Technical Meeting, St. Louis, MO, pp. 503-508.
• Atreya, A., Zhang, C., Kim, H.K., Shamim, T., Agrawal, S., and Suh, J., 1995, "Formation and Oxidation of Soot and NOx in Diffusion Flames," GRI Annual Contractors Meeting, Chicago, IL, Contract # 5093-260-2780.
• Shamim, T., and Atreya, A., 1995, "A Study of the Effects of Radiation on Transient Extinction of Strained Diffusion Flames," Joint Technical Meeting of Combustion Institute, San Antonio, TX, pp.553-558.
• Atreya, A., Agrawal, S., Shamim, T., Pickett, K., Sacksteder, K.R., and Baum. H.R., 1995, "Radiant Extinction of Gaseous Diffusion Flames, "Third International Micro-Gravity Workshop, Cleveland, OH, NASA Conference Publication 10174, pp. 319-325.