Services

 


I served as the editor in chief of one international research journal, an editorial board member for two international journals; an organizer for eight international conferences; an associate editor of two international conference proceedings; a program committee member for seventeen international conferences; a session chair for eleven international or national conferences; a board member for three international- or national-level technical committees; and a member for various committees at department and campus levels within the University of Michigan - Dearborn.

 

 

A. Committee Assignments at the University

1. Department Level

       Ph.D. qualification exam, 12~13

       Department undergraduate committee chair, 12~present

       Department undergraduate committee member, 05~11

       Department undergraduate academic advisor, 02~present

       Department open-house demonstration, 08~12

       ME Bioengineering committee, 12~13

       Department high school student programming contest judge, 07

       Department course coordinator, 06~present

       Department employment web page coordinator, 06~07

       Department seminar coordinator, 06~07

       Department graduate committee member, 02~05

 

2. College Level

       CECS Executive Committee, 13~present

       IAVS restructure committee member, 13

       Interim Safety committee member, 13

       Alternative for CECS Executive Committee, 08~09

 

3. University and Campus Level

       Campus research grant review committee member, 13~present

       Campus LEO grant review committee member, 13~present

       Campus research award committee member, 13

       Campus research support committee member, 13~present

       Campus student advisory committee member, 11~13

       Faculty member, Bone & Joint Injury Prevention & Rehabilitation Center, University of Michigan, Ann Arbor, 08~present

       Coordinator for student trips from Dearborn Center of Math, Science and Technology, 07

       Campus research support committee member, 06~07

       Campus research grant review committee member, 06~07

       Campus commencement representative, 03

 

B. Journal Service

1. Associate Editor

       International Journal of Modelling and Simulation, 06~present

       International Journal of Computers and Applications, 06~present

 

2. Paper Reviewer

       International Journal of Modelling and Simulation

       SAE Transactions

       Pattern Analysis & Applications

       International Journal of Computational Methods

       Computer Aided Design & Applications

       International Journal of Damage Mechanics

       Engineering with Computers

       Computer Aided Design

       International Journal of Computers and Applications

 

B. Conference Service

1. Conference Organizer

        CAD'12, the 9th Annual International CAD Conference and Exhibition, Niagara Falls, Canada (Conference co-Chair)

        2014 Computer Aided Modeling, Simulation and Analysis, June 30-July 3, Guimaraes, Portugal (Chair)

        2013 Computer Aided Modeling, Simulation and Analysis, June 24-27, Ho Chi Minh City, Vietnam (Chair)

        2012 Computer Aided Modeling, Simulation and Analysis, June 18-21, Salvador de Bahia, Brazil (Chair)

        Session of Multi-Scale Modeling in Nanostructured Materials, 2012 International Mechanical Engineering Congress and Exposition, November 9-15, Houston, Texas, USA (co-Chair)

        A Symposium on Characterization and Mechanism of Material Failure, 2011 International Mechanical Engineering Congress and Exposition, Nov. 11-17, Denver, Colorado, U.S.A. (Chair)

        A Symposium on Characterization and Mechanism of Material Failure, 2010 International Mechanical Engineering Congress and Exposition, Nov. 12-18, Vancouver, Canada (Chair)

-------------------------------------------------------------------------------------------------

        2007 International Conference on Computer Graphics and Virtual Reality, June 25-28, Las Vegas, U.S.A (co-Chair)

        2006 International Conference on Computer Graphics and Virtual Reality, June 26-29, Las Vegas, U.S.A (co-Chair)

 

2. Program Committee Member

       2014 the 5th International Conference on Emerging Ubiquitous Systems and Pervasive Networks

       2014 International Mechanical Engineering Congress and Exposition, Nov. 14-20, Montreal, Canada

       2013 the 11th IEEE/IFIP International Conference on Embedded and Ubiquitous Computing, Nov. 13-15, Zhangjiajie, China.

       2012 the 10th IEEE/IFIP International Conference on Embedded and Ubiquitous Computing, Dec. 5-7, Paphos, Cyprus.

       The 2011 Fourth International Joint Conference on Computational Sciences and Optimization, Apr 15-19, Kuming and Lijiang City, China

       2011 Second International Conference on Business Intelligence and Financial Engineering, October 17-18, Wuhan, China

       2009 the Second International Symposium on Financial Information Processing, Beijing, China

       International Conference on CAD'09, Reno, Nevada, USA

       International Conference on CAD'08, Orlando, Florida, USA

--------------------------------------------------------------------------------------------

       International Conference on CAD'07, Honolulu, Hawaii, U.S.A.

       2007 International Conference on Computer Science, Vienna, May 25-27, 2007

       The 2007 International Conference on Computational Science and Its Applications (ICCSA 2007), Kuala Lumpur, Malaysia

       2007 International Conference on Computer Graphics and Virtual Reality, Las Vegas, U.S.A.

       2007 Computer Aided Design and Computer Graphics, Beijing, P.R. China

       The 2006 International Conference on Computational Science and Its Applications (ICCSA 2006), Glasgow, U.K.

       Co-chair of Paper Review, Session for Advanced Concepts in Product Engineering, Design and Innovation, Commercial Vehicle Engineering Congress & Exhibition, 2006, Chicago, U.S.A.

       2006 International Conference on Computer Graphics and Virtual Reality, Las Vegas, U.S.A.

 

3. Session Chair

       CAD'13, the 10th Annual International CAD Conference and Exhibition, Bergamo, Italy

       CAD'12, the 9th Annual International CAD Conference and Exhibition, Niagara Falls, Canada

       2012 International Mechanical Engineering Congress and Exposition, November 9-15, Houston, Texas, USA

       2011 International Mechanical Engineering Congress and Exposition, Nov. 11-17, Denver, Colorado, U.S.A.

       2010 International Mechanical Engineering Congress and Exposition, Nov. 12-18, Vancouver, Canada

-----------------------------------------------------------------------------------------

       International Conference on CAD'07, Honolulu, Hawaii, U.S.A. (moderator)

       2007 International Conference on Computer Graphics and Virtual Reality, Las Vegas, U.S.A.

       2006 International Conference on Computer Graphics and Virtual Reality, Las Vegas, U.S.A.

       Design and Innovation, Commercial Vehicle Engineering Congress & Exhibition, 2006, Chicago, U.S.A.

       2004 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah, U.S.A.

       2004 National Conference on Integrating Practice into Engineering Education, Dearborn, Michigan, U.S.A.

 

4. Paper Reviewer

       2014 International Mechanical Engineering Congress and Exposition, Nov. 14-20, Montreal, Canada

        2014 Computer Aided Modeling, Simulation and Analysis, June 30-July 3, Guimaraes, Portugal

        2013 Computer Aided Modeling, Simulation and Analysis, June 24-27, Ho Chi Minh City, Vietnam

        2012 Computer Aided Modeling, Simulation and Analysis, June 18-21, Salvador de Bahia, Brazil

        International Mechanical Engineering Congress and Exposition, November 9-15, Houston, Texas, USA

        International Mechanical Engineering Congress and Exposition, Nov. 11-17, Denver, Colorado, U.S.A.

        International Mechanical Engineering Congress and Exposition, Nov. 12-18, Vancouver, Canada

       2011 Second International Conference on Business Intelligence and Financial Engineering, October 17-18, Wuhan, China

       2009 the Second International Symposium on Financial Information Processing, Beijing, China

       2008 Advances in Computer Science and Technology, Langkawi, Malaysia, April 2-4, 2008.

----------------------------------------------------------------------------------------

       2008 Artificial Intelligence and Applications, Innsbruck, Austria

       2007 International Conference on Computer Graphics and Virtual Reality, Las Vegas, U.S.A.

       2007 International Conference on CAD, Honolulu, Hawaii, U.S.A.

       2007 Advanced in Computer Science and Technology

       2007 Web-based Education Conference

       2007 Graphics and Visualization in Engineering Conference

       Design and Innovation, Commercial Vehicle Engineering Congress & Exhibition, 2006, Chicago, U.S.A.

       2006 International Conference on Computer Science and Applications; 2006 International Conference on Computer Graphics and Virtual Reality

       2006 IASTED International Conference on Visualization, Imaging and Image Processing, Palma de Mallorca, Spain

       2005 International Conference on CAD-Graphics

       2004 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Salt Lake City, Utah, U.S.A.

 

D. Profession Society Service

1. Technical Committee

       Advisory Committee, Computed Aided Design and Application, 12~present

       SAE new concept committee member, 04~07

       ASME Surface Texture Standard Committee member, 04~present

       International Association of Science and Technology for Development (IASTED), Computer Graphics Technical Committee member, 05-08

 

2. Invited Talks or Meetings

       NSF I-corps workshop, 14

       Shanghai University of Engineering Science, 13

       Keynote speech on 'Bridging Damage Mechanics and Digital Sensing Technique', C.L. Chow and J. Shen, Proceedings of the First International Conference on Damage Mechanics, pp. 1-6, 2012, Serbian Chamber of Engineer, Belgrade

       "Material Damage Estimated via Linking Micro/Macroscale Defects to Macroscopic Mechanical Properties" Keynote Speech, Meeting of SAMPE Great Lakes Chapter, June 1, 2011.

       NSF workshop on Research Priority of Advanced High Strength Steels, 06 (Invited for participation)

       GM Research Center, 05

       US Army TACOM, 04

       PAM '03 Conference, 03

 

3. Consultation

       Contributed to the development of the world-class commercial software, OptiStruct and HyperMesh for the period from 02 to 06. These two software products have been deployed in many Fortune 500 companies and Original Equipment Manufacturers (OEMs) worldwide.